Filter
Top Products
22 Cyclades PM IPDU Installer/Administrator/User Guide
factory_defaults
The factory_defaults command resets the unit to its factory configuration. When used with a daisy
chain, and no argument is given, this command resets all units in the chain. This command is
available to the admin user only.
Syntax
factory_defaults [<IPDU#>|<IPDU_ID>]
Arguments
Examples
To reset the factory defaults, enter:
help
The help command displays the system help message for all commands or for a single command
when specified.
NOTE: When the admin user is logged in, the help command displays all commands. When a regular user is
logged in, the help command displays only the regular user commands.
Syntax
<command> help
Arguments
<command> Any available command
Examples
To view the system help message for a specific command, enter the command followed by
help.
To view the system help message for all commands, enter:
pm>help
no argument
Resets all PM IPDUs in the daisy chain to factory default
<IPDU#>
Number of the PM IPDU in the chain
<IPDU_ID>
Identification string previously set by the id command
pm>factory_defaults 1
pm>syslog help