Filter
Top Products
24 Cyclades PM IPDU Installer/Administrator/User Guide
Arguments
Examples
To check the hardware overcurrent status of IPDU #1, enter:
To reset the hardware overcurrent protection, enter:
id
The id command sets or displays the ID of a PM IPDU. A maximum of 16 characters (not case
sensitive) is allowed. Spaces, numbers and special characters are allowed. This command is
available to the administrator user only.
This command works in a daisy chain.
Syntax
id [<IPDU#>] [<IPDU_ID>]
-or-
id [<IPDU_ID>] [<IPDU_ID>]
-or-
id
Arguments
If <IPDU_ID> follows <IPDU#>, or if the <IPDU_ID> parameter is typed twice, the latest entry
of the <IPDU_ID> parameter updates the ID string.
<IPDU#>
IPDU number in a daisy chain
<IPDU_ID>
Identification string previously set by the id command
reset
Turns overcurrent protection off (normal operation)
pm>hwocp 1
pm>hwocp 1 reset
<IPDU#>
IPDU number in a daisy chain
<IPDU_ID>
Identification string previously set by the id command
no argument
Displays the IDs of all PM IPDUs in the daisy chain