Filter
Top Products
The Parameter List
158 AXIS 5500 / AXIS 5550 User’s Manual
TCP Ports Opened for Raw Printing
AXIS 5500
AXIS 5550
Note: The TCP port numbers entered in RTEL_PRx. will override the settings in
the two tables above.
SNMP Device Index
When using the TCP/IP protocol (and if the printer driver permits), the
print server can use SNMP Status to find out if the printer is ready to
accept a new job.
By default, Windows uses the value “1” when addressing an SNMP
device, which is correct for single port print servers. For a multiport print
server, obtain the SNMP Device Index from the table below.
Port Number Port Via Logical Printer Condition
9100 USB1 — DEFAULT_RAW_TCP. set to 9100
9902 USB1 — AXIS_PRINT_SYSTEM. Enabled
9101 USB1 — NDPS. Enabled
Port Number Port Via Logical Printer Condition
9100 LPT1 —
DEFAULT_RAW_TCP. set to 9100
9101 USB1 —
9900 LPT1 —
AXIS_PRINT_SYSTEM. Enabled
9902 USB1 —
9100 LPT1 —
NDPS. Enabled
9101 USB1 —
Print Server LPR Queue Name Raw Port Number SNMP Device Index
Single Port:
Parallel LPT1 9100 1
Single Port:
USB USB1 9100 1
Dual Port:
Parallel
USB
LPT1
USB1
9100
9101
1
2
Dual Port:
Parallel
Parallel
LPT1
LPT2
9100
9101
1
2
Three Port:
Parallel
Parallel
Serial
LPT1
LPT2
COM1
9100
9101
9102
1
3
2