Filter
Top Products
41
Axxess
®
Model 8690 User Guide – ITP Mode
GETTING STARTED
Placing Intercom Calls
To place an intercom call:
1. With or without the handset lifted, dial an extension number.
2. If your call goes through handsfree to an endpoint’s speaker, speak after you hear
a double tone.
If you hear continuous ringing, wait for the call to be answered.
The system allows you to place a non-handsfree call that will override handsfree
mode on the extension you are calling. If you choose to use the Ring Intercom
Always feature to always send non-handsfree calls, the called party must pick up the
handset to answer the call.
To place a non-handsfree call that will ring at the other endpoint until answered:
Press before dialing the extension number.
NOTE: Dialing before the extension number forces the called extension to ring
and overrides the handsfree option.
To program your endpoint to always send non-handsfree calls using the Ring
Intercom Always feature:
With the handset in the cradle, dial . The current status is shown.
If there is no answer or if the endpoint is busy when you place an intercom call,
you can do any of the following:
• To leave a station message: Press
Message or the LEAVE MESSAGE menu but-
ton and then hang up.
• To leave a voice mail message: Press
Message or the LEAVE VOICE MAIL menu
button and wait for the message center to answer. (See page 51 for more message
options.)
NOTE: This option is only available if the called endpoint has a voice mailbox.
• To camp onto a busy extension: Stay on the line and wait for the endpoint to
become available. Do not hang up. After the system timer expires, you hear
music until the endpoint is available.
NOTE: You cannot camp on to an endpoint if it is in DND mode.
• To request a callback (queue on to the endpoint): Press and hang up. When
the endpoint is available, your endpoint rings. (To cancel the queue request
before the callback, press
.)
#
#
3
7 7
6
6