Filter
Top Products
73
Axxess
®
Model 8690 User Guide – ITP Mode
MOVING ON
To perform a directory search using your dialpad buttons:
1. If your endpoint is idle, press the DIRECTORY menu button, then press the menu
button for the desired directory (IC DIRECTORY, OUTSIDE DIR, or FEATURE
DIR).
If placing a call, choose between
OUTSIDE DIR and IC DIRECTORY.
2. Enter letters or numbers (up to 10 characters) as described below:
• Remain in alphanumeric mode (Message lamp lit): Press the dialpad buttons
to enter the desired characters. (Note that letters correspond to the letters
printed on dialpad buttons 2-9.) The number of times a button is pressed
determines which character is entered. For example, 77776444844 would
enter “SMITH.” When adjoining characters are located under the same but-
ton, press
Fwd once to advance to the next character. For example,
5666
Fwd66337777 would enter “JONES.” Press Fwd twice to leave a space
or press
Mute to backspace.
• Change to numeric mode (Message lamp unlit): Press the dialpad buttons to
enter an extension number. Press
Mute to backspace.
3. Press the SEARCH menu button to begin the search. If desired, you can use the
PREVIOUS and NEXT menu buttons or the high/low arrows next to the Volume
button to move alphabetically through the directory.
4. Press the CALL (for IC or OUTSIDE DIR) or ACCEPT (for FEATURE DIR)
menu button to dial a number or feature code while it is displayed.
NUMBER OF TIMES BUTTON IS PRESSED
BUTTON12345
1-&()1
2ABC'2
3DEF!3
4GHI
*
4
5JKL#5
6MNOÑ6
7PQRS7
8TUV?8
9WXYZ9
0@:. ,0