Filter
Top Products
User Manual MFGD 3420 13
Some adjustments can be made by changing an adjustment value.
To change an adjustment value:
- Turn the control wheel to select the adjustment.
- Click the wheel shortly. A pointer appears next to the
adjustment name.
- Turn the wheel to change the value.
- Click the wheel shortly to confirm the change. The pointer
disappears again.
Some adjustments can be made by selecting from a range of
predefined settings. To change the selection:
- Turn the control wheel to select the adjustment.
- Click the wheel until the desired setting appears in the menu.
Saving changes
When you change a setting value, the change is automatically saved
immediately.
3.3. Setting the Luminance value
With this function, the backlight value is stabilized by the I-Guard
sensor. The value you enter is the target backlight luminance, ex-
pressed in Cd/m². This luminance value will be established by the I-
Guard control circuit.
Proceed as follows:
1 In the main menu, turn the control wheel to select the Luminance
menu.
MAIN MENU
Luminance
Settings
Information
EXIT
2 Click the control wheel. The Luminance menu appears.
3 Turn the control wheel to select the Luminance function.
4 Click the control wheel. A pointer appears at the left of the menu.
5 Turn the control wheel to adjust the Luminance Target value.
6 Click the control wheel to confirm the adjustment.
7 Turn the control wheel to select Exit.
8 Click the control wheel to return to the main menu.