Filter
Top Products
User Manual MFGD 3420 9
2.3 Portrait or landscape position
You can change the orientation of the panel at any time, but it is more
convenient to select landscape or portrait orientation before
connecting the cables.
To change the panel orientation:
1 Stand at the front side of the panel and take the panel at both
sides.
2 Very important: Tilt the panel before changing
the orientation.
Should you change the panel orientation without
tilting it first, you might irreversibly damage the
tilt & swivel mechanism.
3 To change
from portrait to landscape, turn the
panel counterclockwise while lifting it up
slightly.
To change from landscape to portrait, turn
clockwise.
2.4 Connecting the signals
To get access to the connectors, open the cover of the connector
compartment by pulling down the 2 clips of the cover.
To connect the video & sync signals:
1 Connect one end of the video cable to the DVI input (5) of the
display.
2 Connect the other end of the video cable to the video output of
your video source (Computer graphics board with digital video
output).
Vid1
Vid2
Example of video connection in a Coronis dual head configuration