Barco F22 Projector User Manual


 
68
english 中文 日本語
The projector may from time to time need cleaning. Never open the unit, as this will
void any warranties. Refer service and repair to qualified personnel only.
The projector is using lamps that have a limited life time. Please refer to the LAMP
CHANGE section below for further details.
Only the exterior of the unit may be cleaned. Use a damp cloth. Make sure no
liquids enter the inside of the projector Vacuum clean all the air vents (A) regularly
to maintain sufficient air flow.
The projection lens (B) is sensitive to scratches. Use lens cleaning tissue, available
at all photographic stores when cleaning the projection lens. Use lens cap when
not in use.
HEAVY DUTY AND CONTINOUS USE
The projector contains moving parts (such as cooling fans) that have limited life-
expectancies. When the projector has been used for 8 000 hours, and when the
unit is used in mission-critical applications, it is recommended that the projector is
given preventive maintenance by a qualified service person. This will help ensure
long term stable operation.
MAINTENANCE
SERVICE INFORMATION
This product contains no user serviceable parts. If the product fails to function as
expected, please first check that all connections are properly made, and that the
power cord is properly connected. Please check that the projector as well as the
video and computer sources are all switched on. Cables and cords may break
over time. Try to change cables and cords, in case there is a bad or intermittent
connection. Check if the circuit breaker or fuse of your mains is intact. In the event
of product failure, please contact your reseller. You should prepare a description
of the symptoms of failure you experience. Please also state product number and
serial number as printed on the label on the bottom of the projector.
SERVICE PERSONNEL INFORMATION
WARNING
Use UV radiation eye and skin protection during servicing.
投影机可能需要时而不时地进行清洁。切勿打开投影机,因为这会使任何担保无
效。服务和维修工作仅可交由合格的人员处理。.
投影机使用的灯泡具有有限的使用寿命。请参阅下面的“灯泡更换”部分获取
更多信息。
仅可清洁投影机的外部。使用湿布。确保投影机空隙内未进入任何液体。.(A).定
期清洁所有通气口以维持足够的气流。
投影机镜头.(B).对刮伤很敏感。清洁投影机镜头时,使用镜头抹镜纸,这种抹镜
纸在所有摄影店中均有售。不使用时,请使用镜头盖。
耐用和持续使用
投影机包含具有有限预期寿命的移动零件(如冷却风扇)。当投影机使用.8000.
小时后,当投影机在关键任务应用中使用时,建议由合格的服务人员定期检修。
这将有助于确保长期稳定的操作。
维护
服务信息
此产品不含任何用户可以自行修理的零件。如果产品无法按预期操作,请首先检
查是否已正确连接了所有零件,然后检查电源线是否正确连接。请检查全部打开
了投影机以及视频和电脑来源。电缆和电线可能随着时间流逝破损。如果连接不
良或断断续续,请尝试更换电缆和电线。请检查断路器和干线的保险丝是否完好
无损。如果产品出现故障,请联系您的经销商。您应该准备对所遭遇的故障症状
的说明。此外,请说明投影机底部标签上打印的产品编号和序列号。
服务人员信息
警告
在维修过程中,使用.UV.辐射眼睛和皮肤保护装置。
本プロジェクターは、適時にクリーニングが必要となります。本体は絶対に開けない
でください。開けた場合は、いかなる保証も無効となります。.
本プロジェクターは、寿命のあるランプを使用しています。詳しくは、後述の「ランプ交
換」のセクションをご参照ください。
クリーニングは、本体の外面のみに行うことができます。湿らせた布を使用してクリ
ーニングします。プロジェクターの内部に液体が一切入らないように注意してくださ
い。通気口.(A).はすべて定期的に掃除機できれいにし、十分な空気の流れを維持し
てください。
投写レンズ(B)はキズがつきやすい製品です。投写レンズをクリーニングする際は、
一般的なカメラ店で扱っているレンズクリーニング用ティッシュをお使いください。
使用しないときはレンズキャップをかぶせます。
耐久性と連続使用について
本本プロジェクターには、寿命のある可動部分(冷却ファンなど)が搭載されていま
す。プロジェクターが8000時間使用されたときや、極めて重要な用途で使用される場
合は、予防措置として、有資格者にプロジェクターのメンテナンスを依頼することをお
すすめします。これにより、操作の長期的な安定性が確保されやすくなります。
メンテナンス
サービス情報
本プロジェクターには、ユーザーが整備できる部品は含まれていません。製品が期待
どおりに機能しない場合は、すべての接続が正しく行われているか、電源コードがき
ちんとつながれているかをまず確認してください。プロジェクターやビデオ/コンピュ
ータソースがすべてオンになっていることを確認してください。ケーブルやコード類
は時間が経つと破損することがあります。ケーブルやコード類の接続が不良の場合、
また一時的に不良な場合は、交換してください。メインの回路の遮断器やヒューズに
損傷がないことを確認してください。製品が故障している場合は、お近くの販売代理
店にご連絡ください。その際には、実際に起きた不具合の症状を文書でご説明くださ
い。また、プロジェクターの底部のラベルに印刷されている製品番号とシリアル番号
をお知らせください。
サービス担当者情報
警告
サービス提供時には紫外線照射から目と皮膚を保護するものを使用すること。