Filter
Top Products
Barco - LC-5621 - User manual _______________________________________________________ 31
Operation
7.1.2.6 Enter button (IR control)
Pressing this button enables the user to select/activate the menu item when the
OSD menu is activated.
7.1.2.7 Standby button (IR control)
Pressing this button puts the display in standby mode.
Standby mode means that the power to the LCD panel and backlight is disabled
and that all power consumption is reduced to a strict minimum. The display
turns black.
To bring the unit out of this mode, press the button again. Power is restored
immediately.
7.1.2.8 Up/down buttons (IR control)
Pressing this buttons will navigate the “cursor” through the OSD menu when
active or increase/decrease the selected value in the OSD.
7.1.3 Indicators
7.1.3.1 Location of the indicators
Figure 9: Location of the indicators
ENTER
1
1
2
IR receiver
Power LED
2