Filter
Top Products
5. Random Access
5.4.5 Decoding (Optional)
Decoding is only for NTSC video signals.
What can be done ?
The possibility is offered to decode the NTSC video signals via the default American IRE standard or via the European EBU standard.
Decoding a NTSC signal using the European EBU standard may result in a greenish tint.
How to change the decoding setting ?
1. Push the cursor key ↑ or ↓ to highlight Decoding. (menu 5-36)
2. Press ENTER to toggle between EBU or IRE.
3. Press EXIT to return.
PICTURE TUNING
CTI[ON]
MOTION COMPENSATION
COLOR TEMPERATURE
GAMMA
DECODING[EBU]
COLOR DEPTH
INPUT BALANCE
BLACK COLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-36
5.4.6 Color Depth
Purpose
Increases the dark color saturation for video and data sources.
Changing the Color depth value.
1. Push the cursor key ↑ or ↓ to highlight Color Depth. (menu 5-37)
2. Press ENTER to select.
3. Change the value by pushing the cursor key ← or → until the desired dark color saturation is reached.
4. Press EXIT to return the Picture Tuning menu.
PICTURE TUNING
CTI[ON]
MOTION COMPENSATION
COLOR TEMPERATURE
GAMMA
DECODING[EBU]
COLOR DEPTH
INPUT BALANCE
BLACK COLOR
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-37
5.4.7 Input Balance
Why adjusting the input balance?
The input balance is normally correct adjusted in the factory. But due to signal distribution or signal transmission outputs a color
imbalance can be the result. This imbalance can be adjusted source by source for color critical applications. These adjustments
influence only the actual custom adjustment file. This procedure is not so easy and is best done or first demonstrated by an autho-
rized Barco service technician.
46
R5976493 BARCOREALITY SIM 6 MK II 08092003