Filter
Top Products
7. Service Mode
How to change the password ?
1. Push the cursor key ↑ or ↓ to highlight Change Password. (menu 7-8)
2. Press ENTER to display the Change Password menu. (menu 7-9)
4 ’_’ characters are displayed. A new password can be entered with the digit keys of the RCU or local keypad. Every time a digit
is entered, a ’X’ appears on the screen. The confirm new password is still grayed out.
3. Press ENTER, the confirm new password item becomes active. Press EXIT if no changes have to be made.
4. 4 ’x’ characters are displayed in the confirm new password area. Key in your password again with the digit keys of the RCU or
the local keypad.
5. Press ENTER.
If the confirm new password entry is the same as the entered new password, the password is changed.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ.ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
DIMMING
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-8
CHANGE PASSWORD
Enter new password
____
Confirm new password
____
Select with ↑ or ↓
Reprogram with
numeric keys
then <ENTER>
<EXIT> to return
Menu 7-9
7.6 Change the address
What can be changed?
Within the Change password address item, the following items can be changed:
• projector address
• common address
7.6.1 Start up
How to change the address
1. Push the cursor key ↑ or ↓ to highlight Change proj.address (menu 7-10
)
2. Press ENTER to select.
The actual address is filled in.
The first digit is highlighted. (menu 7-11)
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ.ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
DIMMING
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-10
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) : 0
Common address (PPM) : 0
Select with ↑ or ↓
then <ENTER>
Reprogram with ↑,↓,←,→
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 7-11
How to enter the new projector address?
1. Enter the digits with the digit keys on the RCU or local keypad.
Or,
push the cursor keys ← or → to select a digit and change the value by pushing the cursor key ↑ or ↓ until the new value is reached.
Continue with the other digits on the same way. The individual address must be between 0 and 255.
76 R5976493 BARCOREALITY SIM 6 MK II 08092003