Filter
Top Products
DS-RPC Manual
15
Manage Users
Select “Manage Users,” from the main menu allows the admin user to add and delete users, change
passwords, and change the outlet list that determines an outlet user’s access to prescribed outlets. The
following menu appears:
If this is not an initial setup and an outlet user has been added, they will be shown in the User
Management Menu, along with the option to delete users.
NOTE: the first assigned user will be the ‘admin user’ for the outlets.
Assign Outlets:
Select the number of the user to assign outlets
NOTE: If an outlet user’s list is changed while the user is logged in, their outlet list changes
dynamically. If enabled, an updated outlet status report will be issued. ‘Y’ means the outlet is
assigned to the user. ‘N’ means the outlet is NOT
assigned to the user.
Select 1) Add Outlet(s) to assign outlets to a user. The DS-RPC will display the following:
Type the number of the outlet to be assign. For example, if you want engineer to have access to Outlet
2, enter the number 2, followed by <cr>. If you want engineer to have access to Outlets 2, 5, and 8
enter the numbers 2, 5, and 8 separated by commas: 2,5,8, followed by <cr>.
The DS-RPC Unit redisplays the Assigned Outlet Menu of the user with a ‘Y’ for the assigned outlets.
---------------------------------------------
| User | Assigned Outlets |
| | 1 | 2 | 3 | 4 |
---------------------------------------------
1)...admin | Y | Y | Y | Y |
2)...user1 | Y | Y | N | N |
3)...user2 | N | Y | Y | N |
4)...user3 | N | N | Y | Y |
---------------------------------------------
A)...Add User
D)...Delete User
R)...Rename User
Enter user number to assign Outlets, A, D or R.
---------------------------------------------
| User | Assigned Outlets |
| | 1 | 2 | 3 | 4 |
---------------------------------------------
| user3 | N | N | Y | Y |
---------------------------------------------
1)...Add Outlet(s)
2)...Remove Outlet(s)
3)...Add All Outlets
4)...Remove All Outlets
Enter Request:
Enter Outlet number(s):