Filter
Top Products
DS-RPC Manual
6
CAUTION: Before removing or replacing any modules, turn off main power switch located on
the DS-Series Base Unit. Communication to the DS-Series Data Switch will be disrupted while
power is off.
CAUTION: For PERMANENTLY CONNECTED EQUIPMENT, a readily accessible
disconnect device (Circuit Breaker rated not to exceed the amperage rating of the unit) shall be
incorporated in the fixed wiring between the power source and the Baytech unit. For
PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and easily
accessible. The outlets providing power to the unit shall be protected against over current and
short circuit by suitable rated protective devices.