Filter
Top Products
DS-RPC Manual
8
Figure 1
NOTE: to get to the DS-RPC menu select the DS-RPC option and then type ‘config’ at the
prompt.
Figure 2
Select manage users option and select Add User. The following menu is displayed.
NOTE: the first assigned user will be the ‘admin user’ for the outlets.
Figure 3
Enter new user name, than select the user to add individual or all outlets. The following menu is
displayed.
Module:
Attention Character: ]
Device A ................1
Device B ................2
Device C ................3
Device D ................4
DS-RPC ................5
Configure.......................C
Status..........................S
Unit Reset......................RU
Logout..........................T
1)...Manage Users
2)...Change Outlet Name
3)...Enable/Disable Confirmation
4)...Enable/Disable Status Menu
5)...Change Unit ID
6)...Change Alarm Threshold
X)...Exit
---------------------------------------------
| User | Assigned Outlets |
| | 1 | 2 | 3 | 4 |
---------------------------------------------
---------------------------------------------
A)...Add User
D)...Delete User
R)...Rename User
Enter user number to assign Outlets, A, D or R.