Filter
Top Products
OVERVIEW
8
Part No.: F1DZ102T, F1DZ104T
Power: 12V DC, 1A AC power adapter with center-pin positive polarity
Daisy-Chain: Maximum of 4 KVM switches
PCs Supported:
2 (F1DZ102T)
4 (F1DZ104T)
Keyboard Emulation: PS/2
Mouse Emulation: PS/2
Monitor Supported: VGA, SVGA, MultiSync, and LCD (optional adapter may be
required)
Max. Resolution: 2048x1536@85Hz
Bandwidth: 400MHz
Keyboard Input: 6-pin miniDIN (PS/2)
Mouse Input: 6-pin miniDIN (PS/2)
VGA Port: 15-pin HDDB type
LED Indicators:
2 (F1DZ102T)
4 (F1DZ104T)
Enclosure: Metal enclosure with high-impact plastic faceplate
Dimensions:
(F1DZ102T) 11 x 1.75 x 6 in.
(279 x 44.5 x 150mm)
(F1DZ104T) 11 x 1.75 x 6 in.
(279 x 44.5 x 150mm)
Weight:
(F1DZ102T) 5.3 lbs. (2414.5g)
(F1DZ104T) 5.3 lbs. (2414.5g)
Operating Temp: 32° to 104° F (0° to 40° C)
Storage Temp: -4° to 140° F (-20° to 60° C)
Humidity: 0-80% RH, non-condensing
Warranty: 5 years
NOTE: Specifications are subject to change without notice.
Specifications
9
INSTALLATION
Pre-Configuration
Where to Place the Switch
The enclosure of the OmniView SE Plus Series KVM Switch is designed
for standalone or rack-mount configuration. An optional Rack-Mount Kit
(F1D005) is available for use with the 4-Port KVM Switch.
Consider the following when deciding where to place the Switch:
• whether or not you intend to use the direct-access port selectors;
• the lengths of the cables attached to your keyboard, monitor,
and mouse;
• the location of your CPUs in relation to your console; and
• the lengths of the cables you use to connect your computers to
the Switch.
Cable Distance Requirements
For PS/2 computers: VGA signals are best retained when transmitted
up to 25 feet. Beyond that length, the probability of video degradation
increases. For this reason, we recommend that the length of the cables
between the connected computers and the Switch does not exceed
25 feet.
Note: If you need your console to reside further than 25 feet from the
Switch, we recommend using the Belkin CAT5 Extender (F1D084) with a
standard CAT5 UPT cable. By using this device, you may increase the
distance between your Switch and your PS/2 keyboard, PS/2 mouse, and
monitor by as much as 500 feet without risking signal degradation.
For USB computers: USB signals are the strongest when transmitted up to
15 feet between the Switch and the CPU. Beyond 15 feet, the probability
of signal degradation is likely, and this may cause the device to fail.
Cautions and Warnings
Avoid placing cables near fluorescent lights, air conditioning equipment,
or machines that create electrical noise (e.g., vacuum cleaners).