Filter
Top Products
14
Using the Belkin Wireless Access Point Manager
2. The "Input Password" window will appear. Your WAP ships from the factory
with the password set to "MiniAP". Keep in mind that the password is case-
sensitive, and enter the password.
Password = "MiniAP" (case-sensitive)
3. When connected, the word "Connected" will appear under the column
labeled "State". If you cannot connect, see the troubleshooting tips at the
end of this manual.
Configuring to the WAP
The WAP can be configured for many different parameters—from setting the
password to enabling the encryption. To configure the WAP, click on
"Command" and select "Configure AP".