Filter
Top Products
Using the Belkin Wireless Access Point Manager
Setting 64-bit Encryption
1. Select 64-bit from the drop-down menu.
2. Select "Create with Passphrase".
3. Enter a passphrase and click "Apply".
4. Select the "Default Key ID" from the
drop-down menu. These are labeled
1–4. Click "Apply".
64-bit encryption is now enabled in the
WAP. Each wireless-equipped computer
(client) that needs to communicate with the
WAP must be set to the same encryption settings.
Setting 128-bit Encryption
1. Select 128-bit from the drop-down menu.
2. Select "Create with Passphrase".
3. Enter a passphrase and click "Apply".
128-bit encryption is now enabled in the
WAP. Each wireless-equipped computer
(client) that needs to communicate with
the WAP must be set to the same
encryption settings.
Using MAC Address Filtering
1. To set up the MAC filtering, click on "Command" and select
"Set MAC Filter".
19