Filter
Top Products
21
Using the Belkin Wireless Access Point Manager
Changing the Password
1. Select "Configure", then
"Change Password".
2. Enter the new password, then
confirm it. Press "OK".
After changing the password, you will need to connect to the AP again.
Resetting the WAP
If the WAP stops working properly, performing a reset can solve the problem.
From the main screen, select "Configure", then "Reset AP". The AP will reset
itself. After resetting, you will need to connect to the AP again.
Restoring Factory Default Settings
To restore the factory default settings, select "Configure", then "Reload Default".
The AP default settings will be restored. After restoring the defaults, you will
need to connect to the AP again.
WAP Parameter Default Value
AP Name MiniAP
SSID WLAN
Channel 11
RTS Threshold 2346
IP Address 192.168.0.254
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
DHCP Client Enabled
Encryption Disabled
MAC Address Filter Disabled
Password MiniAP (case-sensitive)