Belkin F5D7000 Network Card User Manual


 
Installing your Card is done in three easy steps.
1. Install the software FIRST. If you install the Card inside of your PC before you
install the software, it will not work.
2. Install the Card inside of your PC.
3. Turn on your PC and let Windows operating system (OS) finish installing
the Card.
Note: Install the software first before you install the Card into your PC.
Software and Driver Installation
1. Insert the CD into your CD-ROM drive.
2. The “Wireless Desktop Network Card Setup Utility” screen should automatically
appear. If it does not appear within 15-20 seconds, then select your CD-ROM
drive and double-click on the folder named “Files”. Next double-click on the
icon named “F5D7000_UTILITY.exe”.
3. In the utility screen, drag your mouse over the “Install” button, then select
“Click here” to start the software installation program.
INSTALLING AND SETTING UP THE CARD
4. The installer will start. If you are using Windows XP, it is recommended that
you use the Belkin Wireless Desktop Network Card Utility to manage the Card’s
wireless settings. If you want to use Windows XP to manage the Card, check
“Use the Windows XP Wireless Network Connection Utility”. Instructions on
how to use Windows XP’s Connection Utility are available from Microsoft. Click
“Next” to continue.
5. Accept the Belkin Software License Agreement by clicking the “YES” button.
INSTALLING AND SETTING UP THE CARD
6 7