Filter
Top Products
INSTALLING AND SETTING UP THE CARD
13
5. Windows OS may ask you to restart the computer. If it does, click “Yes”
or “Restart”.
6. When the computer restarts, an icon will appear in the bottom right-hand
corner of your screen. See below:
Green Icon: Connected to a wireless network, good connection
Yellow Icon: Connected to a wireless network, fair connection
Red Icon: No connection to a wireless network
Note: The Wireless LAN Utility icon will also appear in your Control Panel. To open
the Wireless LAN Utility, double-click on this icon.
7. Installation is complete. Refer to your User Manual to configure and use the
Belkin Wireless Utility.
INSTALLING AND SETTING UP THE CARD
12
3. Your Windows OS may ask you where the drivers are located. Make no changes
and click “Next”.
Note: If you are using Windows 2000 or XP, you will get a message telling you
that the drivers are not “signed” by Microsoft. This does not mean there is a
problem. Click “Continue”.
4. Your Windows OS will find the correct driver files and complete the
installation. Windows OS may tell you that the hardware is installed.
Click “Finish” if asked to.