Filter
Top Products
2524
USING YOUR MATRIX2
To update the firmware, you will need the following items:
1. A separate computer running Windows 95, 98, or Me. This computer
must not be connected to the CPU ports on the MATRIX2.
2. An available parallel port on the computer.
3. A custom flash cable (DB25 Male-to-RJ45; included with purchase)
that connects between the MATRIX2 and the computer.
4. Firmware updates files, available at belkin.com.
Connecting Computers:
1. Connect a keyboard, monitor, and mouse to the computer you
prepared for firmware update. It must run Windows 95, 98, or Me.
2. Connect the power adapter to the MATRIX2. Be sure that all connected
computers are powered off at this moment.
3. Connect the custom flash cable (DB25 Male-to-RJ45; included with
purchase). Connect one end of DB25 to your computer’s parallel port
and the other end of RJ45 to the MATRIX2’s flash upgrade jack.
Setting the MATRIX2 into Flash Mode:
The MATRIX2 has four Flash DIP switches:
DIP Switch 1 Mouse
DIP Switch 2 Keyboard
DIP Switch 3 Main
DIP Switch 4 OSD
The DIP switch should be set to the “ON” position when you are
attempting to update the particular firmware. For instance, set the DIP
switch to “ON” to update flash keyboard firmware. While updating
firmware, no more than one DIP switch at a time should be set to the
“ON” position.
1. Once the above steps have been completed, run the flash software
executable. Make sure that the appropriate Flash DIP switch is set to
the “ON” position. Only one firmware can be “flashed” at one time.
USING YOUR MATRIX2
AutoScan Time:
Specifies the amount of time the MATRIX2 remains on a port before
switching to the next port while in AutoScan mode. You may select time
intervals of 7, 15, 30, or 60 seconds. The AutoScan time will apply to
both Console A and Console B
OSD Time:
Specifies the amount of time the OSD menu is displayed. Also specifies
the amount of time the “Port Identification” tag displays on-screen after
making a port selection. You may choose 7, 15, 30, or 60 seconds.
For both settings, you may use the arrow keys to navigate. After you have
selected the desired time intervals, push “Enter” to save the entry. The
OSD time applies to both Console A and Console B.
Press the “ESC” key to go back to the original OSD menu screen.
Press the “ESC” key again to exit On-Screen Display completely.
Once you have selected a computer on the menu, press “Enter” to switch
to that port.
If there are Secondary switches connected, and the AutoScan time and
OSD time settings are set on the Primary unit only, they will also apply to
all Secondary switches.
Updating Firmware:
Flash upgradeable firmware allows you to obtain the latest firmware
upgrades for your MATRIX2. This enables your MATRIX2 to maintain
consistent compatibility with the latest devices and computers. Firmware
upgrades are free for the life of your unit.
To update your firmware, download the appropriate firmware file and
utility from belkin.com. The utility automatically guides you through the
process of updating the firmware on your MATRIX2.
Cautions and Warnings:
We strongly recommend that you update your firmware only if you are
currently experiencing mouse and keyboard problems with your
MATRIX2, as reconfiguring software may lead to unexpected operational
problems. Please contact Belkin Tech Support if you need assistance.
P73783_Omniview_matix2_man.qxd 3/5/02 5:00 PM Page 24