Filter
Top Products
98
INSTALLATION
STEP-BY-STEP INSTALLATION GUIDE
Cautions and Warnings:
Before attempting to connect anything to the MATRIX2 or your
computer(s), please ensure that everything is powered off. Plugging and
unplugging cables while computer(s) are powered on may cause
irreversible damage to the computer(s) and/or the MATRIX2(s). Belkin
Components is not responsible for damage caused in this way.
Installing the MATRIX2 into a Server Rack:
The MATRIX2 includes adjustable mounting brackets ideal for installation
in 19-inch racks. The mounting brackets feature three adjustment
positions to allow the faceplate of the MATRIX2 to mount flush to your
rack-mounted servers, or to the rack. Please follow these simple steps to
achieve the desired adjustment.
1. Determine how far you would like the MATRIX2 to protrude from the
rack. Select a bracket-hole scheme.
2. Attach the bracket to the side of your MATRIX2 using the Phillips
screws provided. (Refer to diagram above).
3. Mount the MATRIX2 to the rack rail assembly.
Note: If this MATRIX2 will be daisy-chained to another MATRIX2, set
the BANK address prior to installing on a rack. Refer to the
section in this User Manual labeled “Connecting Multiple
MATRIX2s (Daisy-Chaining)” (page 12).
Your MATRIX2 is now mounted securely into the bracket and you are now
ready to connect cables to it at the back.
INSTALLATION
PRE-CONFIGURATION
Where to Place the MATRIX2:
The enclosure of the MATRIX2 is designed for standalone or rack-mount
configuration. The MATRIX2 is natively rack-mountable in standard
19-inch server racks. Rack-mount hardware is included with these
switches for a sturdy rack installation.
Consider the following when deciding where to place the MATRIX2:
• whether or not you intend to use the direct-access port selectors;
• the lengths of the cables attached to your keyboards, monitors,
and mice;
• the location of your CPUs in relation to your Consoles;
• and the lengths.
Cable Distance Requirements:
For PS/2 Computers:
VGA signals transmit best at distances of up to 25 feet. Beyond that
length, the probability of video degradation increases. For this reason, we
recommend that the length of the cables between the MATRIX2 and the
connected computers not exceed 25 feet.
Note: If you need your Console to reside further than 25 feet from the
MATRIX2, we recommend using the Belkin CAT5 Extender
(F1D084) with a standard CAT5 UTP cable. By using this device,
you may increase the distance between your MATRIX2 and your
PS/2 keyboard, PS/2 mouse, and monitor by as much as 500 feet
without risking signal degradation.
For USB Computers:
USB signals can be transmitted up to 15 feet between the MATRIX2 and
the CPU. Beyond 15 feet, the probability of signal failure is likely, and this
may cause the device to fail.
Cautions and Warnings:
Avoid placing cables near fluorescent lights, air conditioning equipment,
or machines that create electrical noise (e.g., vacuum cleaners).
P73783_Omniview_matix2_man.qxd 3/5/02 5:00 PM Page 8