Filter
Top Products
Installation Instructions (continued)
8
Connecting a Macintosh
®
to the USB KVM Switch
Using a USB KVM Cable Kit (Belkin F3X1895-XX), connect the VGA
and USB cables to an empty port at the back of the USB KVM.
Connect the other ends of the USB KVM Cable to the
appropriate ports at the back of your Mac. When connecting the
USB cable, plug it into an unused USB port. If all USB ports are
used up, unplug a USB device that is neither a keyboard or a
mouse.
F3X1895-XX
USB “A”
USB “B”
HDDB15
Once you have plugged in the USB cable, Macintosh
®
OS will
detect the built-in 4-port hub, PS/2 Keyboard, and Mouse I/F.
The USB KVM uses standard HID-Class (Human Interface
Device) drivers so no other action is required.
Back of Mac
G3 or G4
Rear View USB KVM
P73428-F1D104-USB-man.qxd 6/14/00 11:02 AM Page 8