Filter
Top Products
Installation Instructions (continued)
6
Once you have plugged in the USB cable, Windows
®
will detect
the built-in 4-port hub, PS/2 Keyboard, and Mouse I/F. Even if
Windows
®
asks for drivers, the drivers are built in. The USB KVM
uses standard HID-Class (Human Interface Device) drivers. So all
you need to do is keep hitting "NEXT" until Windows
®
loads the
drivers. Only when the drivers are loaded can you start using the
devices connected to the USB KVM Switch.
See below:
Click NEXT
Click NEXT
P73428-F1D104-USB-man.qxd 6/14/00 11:02 AM Page 6