Filter
Top Products
2
Hardware Installation
37
2.6.9 IrDA Connector
The mainboard is equipped with an IrDA connector for wireless con-
nectivity between your computer and peripheral devices. The IRDA
(Infrared Data Association) specification supports data transfers of
115K baud at a distance of 1 meter.
Connect your IrDA cable to connector J10 on the mainboard. Set
UART Mode Select in the Integrated Peripherals submenu (Super
IO Device field) of the BIOS to the type of IrDA standard
supported by your device. You must have the proper drivers
installed in your operating system to use this connector. Refer to your
operating systems manual or documentation.
Note:
The sequence of the pin functions on some IrDA cable may be
reversed from the pin function defined on the mainboard. Make
sure to connect the cable to the IrDA connector according to
their pin functions.
Pin
1
2
3
4
5
Function
VCC
N. C.
IRRX
Ground
IRTX
IrDA (J10)
12345