Filter
Top Products
Connection 19
Connecting a USB Reader source device
To connect the projector to a USB Reader source device:
1. Connect a USB Reader source device to the USB slot on the projector.
2. If you wish to make use of a speaker or other audio input equipment, take a suitable
audio cable and connect one end to the audio input socket of the speaker, the other
end to the AUDIO OUT socket of the projector. When the audio cable is connected to
the AUDIO OUT terminal, the speaker output is muted.
The final connection path should be like that shown in the following diagram:
• If the USB Reader main screen is not displayed after the projector is turned on. Press
SOURCE on the projector or remote control and select USB Reader after a source
selection bar displays. See "Presenting From a USB Reader" on page 41 for details.
• The AUDIO OUT socket on the projector supports USB Reader function only. Please see
page 45 for the volume control when using AUDIO OUT.
USB flash disk