Filter
Top Products
Operation32
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The
following settings do not affect the projection settings, operation, or performance.
• Menu display time in the SYSTEM SETUP: Advanced > Menu Settings menu sets the
length of time the OSD will remain active after your last key press. The time length
ranges from 5 to 30 seconds in 5-second increments. Use / to select a suitable time
frame.
• Menu position in the SYSTEM SETUP: Advanced > Menu Settings menu sets the OSD
position in five locations. Use / to select a preferred position.
• Language in the SYSTEM SETUP: Basic menu sets your familiar language for the OSD
menus. Use / to select your language.
• Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo screen to be
displayed during projector start-up. Use / to select a screen.
Shutting down the projector
1. Press Power and a confirmation message
displays prompting you.
If you don't respond in a few seconds, the
message will disappear.
2. Press Power a second time.
3. The Power LED indicator flashes blue slowly
and Ring LED indicator lights blue and fans
stop.
4. Disconnect the power cord from the wall socket if the projector will not be used in an
extended period of time.
I
I
I
I