Filter
Top Products
Operation 37
FUNCTION
(default setting/
value)
DESCRIPTION (default setting/value)
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a
picture mode" on page 27 for details.
Reference
Mode
Selects a picture mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See "Setting the User mode" on page 28 for details.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness" on
page 29 for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 29 for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 29 for details.
Tint
Adjusts the red and green color tones of the image. See "Adjusting
Tint" on page 29 for details.
The function is only available when Video with NTSC system is
selected.
Sharpness
Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness" on page 29 for details.
Color
Temperature
See "Selecting a Color Temperature" on page 29 for details.
Save Settings
Saves the settings made for User mode.
2. PICTURE menu