Filter
Top Products
Operation36
Description of each menu
FUNCTION
(default setting/
value)
DESCRIPTION (default setting/value)
Wall Color
(Off)
Corrects the projected picture’s color when the projection surface is
not white. See "Using Wall Color" on page 29 for details.
Aspect Ratio
(Auto)
There are four options to set the image's aspect ratio depending on
your input signal source. See "Selecting the aspect ratio" on page 26 for
details.
Auto
Keystone
Auto corrects any keystoning of the image.
Keystone
(0)
Corrects any keystoning of the image. See "Correcting keystone" on
page 25 for details.
Auto
Optimizes the picture quality. See "Auto-adjusting the image" on page
25 for details
.
This function is only available when PC signal (analog RGB) is
selected.
Position
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower position
of the page change with every key press you made until they reach
their maximum or minimum.
Phase
Adjusts the clock phase to reduce image
distortion.
This function is only available when
PC signal (analog RGB) is selected.
H. Size
Adjusts the horizontal width of the image.
Digital Zoom
(1.0X)
Magnifies or reduces the projected image. See "Magnifying and
searching for details" on page 26 for details.
1. DISPLAY menu