Filter
Top Products
Operating16
Selecting The Aspect Ratio
1. Press the Aspect button to toggle between the
modes for aspect ratio.
■ At a M1-D signal
memo
NORMAL keeps the original aspect ratio of
the
input signal.
■ At a RGB signal (not M1-D)
■ At a video signal / no signal
memo
At a HDTV signal of 1125i or 750p, only 16:9 can be selected.
Using The Automatic Adjustment Feature
memo
The automatic adjustment operation requires approximately 10 seconds. Also, please
note that it may not function correctly with some input.
1. Press the AUTO button.
■ At a RGB signal
The Vertical position (V POSITION), the horizontal
position (H POSITION), the clock phase (H PHASE)
and horizontal size (H SIZE) will be automatically
adjusted.
memo
Make sure that the application window is set
to its maximum size prior to attempting to use this
feature. Dark pictures may still be incorrectly
adjusted. Use a bright screen when adjusting.
■ At a video signal
The signal type mode best suited for the respective
input signal will be selected automatically.
memo
This function is available only when the
AUTO is selected to the item VIDEO of the INPUT menu. For a component video signal, the
signal type is identified automatically independently of this function.
STANDBY/ON
VIDEO
LASER INDICATOR
ESC MENU
POSITION
RESET AUTO
KEYSTONE
1 2 3
ID CHANGE
SEARCH
ON
OFF
FREEZE MUTE
MAGNFY
PinP
VOLUME
RGB
BLANK
PREVIOUS
NEXT
ASPECT
MOUSE
LASER
LENS SHIFT
+
–––
++
FOCUS ZOOM
ASPECT button
4:3
16:9
NORMAL
4:3
16:9
4:3
16:9
SMALL
STANDBY/ON
VIDEO
LASER INDICATOR
ESC MENU
POSITION
RESET AUTO
KEYSTONE
1 2 3
ID CHANGE
SEARCH
ON
OFF
FREEZE MUTE
MAGNFY
PinP
VOLUME
RGB
BLANK
PREVIOUS
NEXT
ASPECT
MOUSE
LASER
LENS SHIFT
+
–––
++
FOCUS ZOOM
AUTO button
PB9200-e.book Page 16 Thursday, May 27, 2004 2:15 PM