Filter
Top Products
Multifunctional Settings28
AUTO Menu
With the AUTO menu, the items shown in the table below can
be performed. Perform each operation in accordance with the
instructions in the table below.
(This table is continued to the following page.)
Item Description
ADJUST
Pressing the 4 (or the ENTER) button performs the automatic
adjustment.
■ At a RGB signal
The vertical position (V POSITION), the horizontal position (H
POSITION), the clock phase (H PHASE) and the horizontal size (H
SIZE) will be automatically adjusted.
memo Make sure that the application window is set to its maximum
size prior to attempting to use this feature. Dark pictures may still be
incorrectly adjusted. Use a bright screen when adjusting.
■ At a video signal
The signal type mode best suited for the respective input signal will
be selected automatically.
memo This function is available only when the AUTO is selected to
the item VIDEO of the INPUT menu. For a component video signal,
the signal type is identified automatically independently of this func-
tion.
memo This operation requires approximately 10 seconds, and the
message AUTO IN PROGRESS is displayed during the operation.
memo This operation may not work well at some signals. If the pic-
ture becomes unstable (ex. a irregular picture, a color lack), please
select the suitable mode to the item VIDEO of the INPUT menu.
POWER OFF
Set the time using the 5 / 6 buttons. :
Long (max. 99 minutes) Short (min. 0 minute = DISABLE)
ex.
When the time is set to 1 to 99, the projector lamp will go off and the
STANDBY/ON indicator begins blinking when the passed time with
a proper signal (without no-signal and an unsuitable signal) reaches
at the set time. Please refer to the section Turning Off The Power.
POWER ON
Select the TURN ON or the TURN OFF using the 5 / 6 buttons.:
TURN ON TURN OFF
When the TURN ON is selected, you can turn the projector on with-
out pressing the STANDBY/ON button. Please refer to the section
“Turning On The Power”.
AUTO
POWER OFF
ENABLE
1min
AUTO
POWER OFF
DISABLE
0min
: SELECT
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
ADJUST
POWER OFF
POWER ON
SEARCH
RESET
0 min
TURN ON
TURN ON
PB9200-e.book Page 28 Thursday, May 27, 2004 2:15 PM