Filter
Top Products
Multifunctional Settings 27
INPUT Menu (continued)
Item Description
P.IN P. INPUT
Select a signal input port for the child window using the / but-
tons. :
VIDEO S-VIDEO
memo About the child window, please refer to the section Display-
ing the Child Window.
P.IN P. POSIT.
Select the display position of the child window using the / but-
tons. :
memo About the child window, please refer to the section Display-
ing the Child Window.
POWERUP
INPUT
Select a signal input port to display just when the projector is turned
on, using the / buttons. :
LAST INPUT M1-D RGB BNC COMPONENT
S-VIDEO VIDEO
Selecting the LAST INPUT selects the port that was used at the last
time.
INFORMATION
Pressing the (or the ENTER) button displays the INPUT INFOR-
MATION menu.
The INPUT INFORMATION menu shows the information about
the current signal input as illustrated below.
memo The FRAME LOCK message means the frame lock function
is working.
This function automatically works when a RGB signal with vertical
frequency of 50 to 60 is input, and it displays a moving picture more
smoothly.
memo The SCART RGB message means the COMPONENT port is
working as a SCART RGB port. Please refer to the item COMPO-
NENT in this table.
S2-ASPECT
Select the TURN ON or the TURN OFF using the / buttons. :
TURN ON TURN OFF
When the TURN ON is selected, an S2-video signal can be identified
and the optimum aspect ratio is automatically selected.
memo This item is performs only at a S-VIDEO signal.
memo When the ASPECT button is used or the item ASPECT of the
MAIN menu is operated, the TURN OFF will be automatically
selected to this item.
RESET
Select the EXECUTE using the button to reset the INPUT menu
items. :
EXECUTE CANCEL
The items of the INPUT menu are collectively returned to the initial
setting. Note
that the item INFORMATION is not reset.
INPUT-INFORMATION
RGB
1024x768 @60.0
FRAME LOCK
INPUT-INFORMATION
S-VIDEO
SECAM
AUTO
INPUT-INFORMATION
COMPONENT
575i @50
SCART RGB
PB9200-e.book Page 27 Thursday, May 27, 2004 2:15 PM