Filter
Top Products
Air Filter38
Air Filter
WARNING
• Please carefully read the “User’s Manual - Safety Guide.
• Before caring, make sure the power switch is off and the power cable is not plugged in,
then wait at least 45 minutes for the lamp to cool sufficiently.
• Use only the air filter of the specified type NJ08081.
• Do not use the projector with the air filter and filter cover removed. The use without
the air filter could result in damage.
CAUTION
• If the air filter becomes clogged by dust or the like, internal temperature rises and could
cause malfunction. The power is automatically turned off in order to prevent the
projector from overheating internally.
Caring For The Air Filter
The air filter should be cleaned about every 100 hours. If the indicators or a message
prompts you to clean the air filter, clean the air filter as soon as possible.
If the soiling will not come off the air filter, or it becomes damaged, then it needs to be
replaced. Please replace the air filter as soon as possible.
memo When you replace the lamp, please replace also the air filter.
1. Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at
least 45 minutes.
2. After making sure that the projector has cooled adequately, remove the filter cover and
air filter.
3. Apply a vacuum cleaner to the top of the filter cover
and the air filter to clean.
If the soiling will not come off the air filter, or it
becomes damaged, it needs to be replaced.
If the air filter needs to be replaced, contact your
dealer to prepare a new air filter. Tell the dealer your
air filter type.
4. Insert the cleaned air filter or a new air filter, and
replace the filter cover.
5. Turn on the projector power, and reset the filter
timer.
(1) While the projector running, press the MENU
button to open the menu.
(2) Choose the “OPTION” on the menu using the
5 / 6 button, then press the 4 button or
ENTER button.
(3) Choose the “FILTER TIME” using the5 / 6 button, then press and hold the
RESET button for 3 seconds.
(4) Choose the “RESET” using the 5 button.
memo Incorrectly resetting of the filter timer (resetting without replacement, or
neglect of resetting after replacement) will result in incorrect message functions.
IN
TE
R
I
N
PU
T
M1
-D
R
G
B
BN
G
S
-
V
I
D
E
O
STANDBY/O
N
T
EM
P
VIDE
O
COM
P
ONENT
L
AMP
K
E
YST
O
NE
S
E
A
RCH
RE
SE
T
M
E
N
U
FO
CUS
L
EN
S
SHIF
T
ZOOM
Hold the release buttons of
the filter cover while
pulling
down it.
INTE
R
I
NPU
T
M1-D
RGB
BN
G
S
-
V
IDEO
S
TAND
B
Y
/
ON
T
EM
P
V
ID
EO
C
OM
P
ONENT
L
A
M
P
K
E
Y
S
TO
NE
S
E
A
R
C
H
RE
S
ET
M
E
N
U
FOCUS
L
E
NS S
HI
F
T
ZOO
M
Hold the release button of
the air filter while pulling
out it.
PB9200-e.book Page 38 Thursday, May 27, 2004 2:15 PM