Filter
Top Products
Introduction10
English
Controls and functions
Projector
6. MODE/ENTER
Selects an available picture setup mode.
See "Selecting a picture mode" on page
34 for details.
Enacts the selected On-Screen Display
(OSD) menu item. See "Using the
menus" on page 26 for details.
7. Left/
Starts the INFORMATION function.
8. BLANK
U
sed to hide the screen picture. See
"Hiding the image" on page 40 for details.
9. FOCUS/ZOOM Ring
Used to adjust the projected image
appearance. See "Fine-tuning the image
size and clarity" on page 30 for details.
10. Keystone/Arrow keys
(/Up, /Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 31 for
details.
11. AUTO
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 30
for details.
12. Right
Activates panel key lock. See "Locking
control keys" on page 40 for details.
When the On-Screen Display (OSD)
menu is activated, the #7, #10, and #12
keys are used as directional arrows to
select the desired menu items and to make
adjustments. See "Using the menus" on
page 26 for details.
13. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 29 for
details.
1. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See "Indicators" on page 61 for
details.
2. POWER indicator light
Lights up or flashes when the projector is
under operation. See "Indicators" on page
61 for details.
3. TEMPerature indicator light
Lights up red if the projector's temperature
becomes too high. See "Indicators" on page
61 for details.
4. POWER
Toggles the projector between standby
mode and on.
See "Starting up the projector" on page 25
and "Shutting down the projector" on page
46 for details.
5. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
See "Using the menus" on page 26 for
details.
1
3
4
5
2
8
11
7
6
12
13
9
10
10