Filter
Top Products
Operation 53
English
FUNCTION DESCRIPTION
Audio
Settings
Mute
Volume
Treble
Bass
Power On/Off Ring Tone
See "Adjusting the sound" on page 41 for details.
Lamp
Settings
Lamp Mode
See "Setting Lamp mode as Economic" on page 56 for details.
Reset Lamp Timer
See "Resetting the lamp timer" on page 60 for details.
Equivalent Lamp Hour
See "Getting to know the lamp hour" on page 56 for details on
how the total lamp hour is calculated.
HDMI
Settings
HDMI Format
Selects appropriate HDMI format automatically or manually.
HDMI Amplifier Gain
Adjusts the appropriate HDMI amplifier gain automatically or manually.
High Altitude
Mode
A mode for operation in high altitude areas.
See "Operating in a high altitude environment" on page 41 for details.
Security
Settings
Change password
You will be asked to enter the current password before changing to a
new one. See "Utilizing the password function" on page 27 for details.
Power on Lock
See "Locking control keys" on page 40 for details.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you
can connect the projector using a suitable RS-232 cable and update or
download the projector’s firmware. This function is intended for
qualified service personnel.
Test Pattern
Selecting On enables the function and the projector displays the grid
test pattern. It helps you adjust the image size and focus and check
that the projected image is free from distortion.
Closed Caption
Selects the screen to display closed captioning text if available.
Standby
Monitor Out
Selecting On enables the function. The projector can output a
VGA signal when it is in standby mode and the COMPUTER
and MONITOR OUT sockets are correctly connected to devices.
See "Connecting a computer or monitor" on page 18 for how to
make the connection.
Enabling this function slightly increases the standby power
consumption.
Lan Control
Settings
Sets the networking and remote management of the projector. See
"Controlling the projector through a Lan environment" on page 43
for details.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: PC & Component YPbPr
Tuning, Language, Projector Position, High Altitude Mode,
Security Setting, Panel Key Lock and Baud Rate.
5. SYSTEM SETUP: Advanced menu