Filter
Top Products
12
Positioning your projector
English
Positioning your projector
Choosing a location
Your room layout or personal preference will dictate which installation location you select. Take into
consideration the size and position of your screen, the location of a suitable power outlet, as well as the location
and distance between the projector and the rest of your equipment.
Your projector is designed to be installed in one of four possible installation locations:
*To set the projector position:
1. Press MENU/EXIT on the projector or remote control and then press /
until the SYSTEM SETUP: Basic menu is highlighted.
2. Press / to highlight Projector Position and press / until the
correct position is selected.
1. Front Table
Select this location with the projector placed near the
floor in front of the screen. This is the most common
way to position the projector for quick setup and
portability.
2. Front Ceiling
Select this location with the projector suspended
upside-down from the ceiling in front of the screen.
Purchase the BenQ projector ceiling mount kit from
your dealer to mount your projector on the ceiling.
*Set Front Ceiling after you turn the projector on.
3. Rear Table
Select this location with the projector placed near the
floor behind the screen.
Note that a special rear projection screen is required.
*Set Rear Table after you turn the projector on.
4. Rear Ceiling
Select this location with the projector suspended
upside-down from the ceiling behind the screen.
Note that a special rear projection screen and the BenQ
projector ceiling mount kit are required for this
installation location.
*Set Rear Ceiling after you turn the projector on.
SYSTEM SETUP: Basic
Presentation Timer
English
Language
Projector Position
Auto Power Off
Blank Timer
Sleep Timer
Panel Key Lock
Splash Screen
My Screen
Analog RGB
MENU Exit
Front Table
Disable
Disable
Off
Disable
BenQ