Filter
Top Products
5
Important safety instructions
English
12. Always place the projector on a level,
horizontal surface during operation.
- Do not use if tilted at an angle of more than
10 degrees left to right, nor at angle of more
than 15 degrees front to back. Using the
projector when it is not fully horizontal may
cause a malfunction of, or damage to, the
lamp.
13. Do not stand the projector on end vertically.
Doing so may cause the projector to fall over,
causing injury or resulting in damage to the
projector.
14. This product is capable of displaying inverted
images for ceiling mount installation.
Use only BenQ's ceiling mount kit for
mounting the projector and ensure it is
securely installed.
15. When the projector is under operation, you
may sense some heated air and odor from its
ventilation grill. It is a normal phenomenon
and not a product defect.
16. Do not block the projection lens with any
objects when the projector is under operation
as this could cause the objects to become
heated and deformed or even cause a fire.
To temporarily turn off the lamp, press
BLANK on the projector or remote control.
17. Do not place liquids near or on the projector.
Liquids spilled into the projector may cause it
to fail. If the projector does become wet,
disconnect it from the power supply's wall
socket and call BenQ to have the projector
serviced.
Ceiling mounting the projector
We want you to have a pleasant experience using
your BenQ projector, so we need to bring this
safety matter to your attention to prevent possible
damage to person and property.
If you intend to mount your projector on the
ceiling, we strongly recommend that you use a
proper fitting BenQ projector ceiling mount kit
and that you ensure it is securely and safely
installed.
If you use a non-BenQ brand projector ceiling
mount kit, there is a safety risk that the projector
may fall from the ceiling due to an improper
attachment through the use of the wrong gauge or
length screws.
You can purchase a BenQ projector ceiling mount
kit from the place you purchased your BenQ
projector. BenQ recommends that you also
purchase a separate Kensington lock compatible
security cable and attach it securely to both the
Kensington lock slot on the projector and the base
of the ceiling mount bracket. This will perform
the secondary role of restraining the projector
should its attachment to the mounting bracket
become loose.