Filter
Top Products
Operation 35
4. Press to highlight Timer Position and set the timer position by pressing /
.
5. Press to highlight Timer Counting Direction and select your desired counting
direction by pressing / .
6. Press to highlight Sound Reminder and decide if you want to activate sound
reminder by pressing / . If you select On, a double beep sound will be heard at
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7. To activate the presentation timer, press and press / to highlight On and
press MODE/ENTER.
8. A confirmation message appears. Highlight Yes and press MODE/ENTER on the
projector or remote control to confirm. You will see the message “Timer is On”
appearing on the screen. The timer starts counting when the timer is on.
To cancel the timer, perform the following steps:
1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and highlight
Off. Press MODE/ENTER. A confirmation message appears.
2. Highlight Ye s and press MODE/ENTER to confirm. You will see the message
“Timer is Off” appearing on the screen.
Remote paging operations
Connect the projector to your PC or notebook with a USB cable prior to using the paging
function. See "Connection" on page 18 for details.
You can operate your display software program (on a connected PC) which responds to
page up/down commands (like Microsoft PowerPoint) by pressing PAGE +/PAGE - on
the remote control.
If remote paging function doesn't work, check if the USB connection is correctly made and
the mouse driver on your computer is updated to the latest version.
The remote paging function cannot work with Microsoft
®
Windows
®
98 operating system. Windows
®
XP or
higher operating systems are recommended.
The remote paging function cannot work when an USB disk is connected to the projector as the input source.
Freezing the image
Press FREEZE on the remote control to freeze the image. The word “FREEZE” will
appear on the screen. To release the function, press any key on the projector or remote
control.
If your remote control has the following keys, please note that they cannot be pressed to release the function:
LASER, #2, #5, PAGE +/PAGE -.
Even if an image is frozen on the screen, the pictures are running on the video or other
device. If the connected devices have active audio output, you will still hear the audio even
though the image is frozen onscreen.
Center Top-Left Top-Right Bottom-Right Bottom-Left
Selection Description
Count Up Increases from 0 to the preset time.
Count Down Decreases from the preset time to 0.