Filter
Top Products
Operation50
Function Description
Standby
Settings
Network
Selecting On enables the function. The projector is able to provide the
network function when it is in standby mode.
Microphone
Selecting On enables the function. The projector can output the
microphone signal when it is in standby mode and all the necessary
equipment is correctly connected. See "Playing sound through the
projector" on page 19 for details.
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See "Connection" on page 18 for how
to make the connection.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press / to
choose the source that you wish to use. See "Connection" on page 18
for how to make the connection.
Enabling this function slightly increases the standby power consumption.
Network
Settings
Wired LAN
Wireless LAN
Remote Desktop
Projection Log In Code
Broadcasting
See BenQ Network Projector Operation Guide for details.
AMX Device Discovery
When AMX Device Discovery is On, the projector can be detected
by AMX controller.
MAC Address
Displays the mac address for this projector.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size, Projector
Installation, Color Space Conversion, High Altitude Mode, Security
Settings, Baud Rate and Network Settings.
5. SYSTEM SETUP: Advanced menu