Filter
Top Products
Operation48
FUNCTION DESCRIPTION
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 36 for details.
Lamp
Settings
Lamp Mode
See "Setting Lamp Mode as Economic" on page 50 for details.
Reset lamp timer
See "Resetting the lamp timer" on page 54 for details.
Equivalent Lamp Hour
See "Getting to know the lamp hour" on page 50 for details.
Security
Settings
Change password
You will be asked to enter the current password before changing to a
new one.
Change Security Settings
Power on Lock
See "Securing the projector" on page 26 for details.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you
can connect the projector using a suitable RS-232 cable and update or
download the projector’s firmware. This function is intended for
qualified service personnel.
LED Indicator
Selecting On enables the function and the POWER LED on the
control panel lights when the project is in use.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: PC & Component YPbPr
Tuning, Language, Projector Position, High Altitude Mode,
Security Setting and Baud Rate.
Current
System
Status
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE: Basic menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
Firmware Version
Shows firmware version.
5. SYSTEM SETUP
menu
6. INFORMATION menu