Filter
Top Products
41
Using the projector
English
Advanced Setup menu
Background Color
(Blue)
Allows you to choose the color of the background screen that will be displayed
when there is no input source detected.
Menu Settings
Menu Display Time (10 sec)
Sets the length of time the OSD will remain active after your last key press. The
range is from 5 to 30 seconds in 5-second increments.
Menu Position (Center)
Sets the On-Screen Display (OSD) menu position.
Input Source
Selects an input source to be projected. See "Selecting an input source" on
page 21 for details.
Auto Source Search
(Off)
Sets whether the projector searches automatically for input sources. If the source
scan is On, the projector will scan for input sources until it acquires a signal. If
the function is not activated, the projector selects the last used input source.
Function
(Default setting/value)
Description
Lamp Settings
Lamp Power (Normal)
Selects the projector lamp power between Normal and Economic modes.
Reset Lamp Timer
Once the lamp is renewed, select Reset to return the lamp timer to "0". See
"Resetting the lamp timer" on page 47 for details.
Equivalent Lamp Hour
Shows the lamp hour information. See "Getting to know the lamp hour" on
page 44 for details.
HDMI Settings
(Auto)
Selects an input source type for the HDMI signal. Auto is the default and
recommended setting. You can also manually select the source type. The
different source types carry different standards for the brightness level.
This function is only available when the HDMI signal is selected.
Baud Rate
(115200)
Selects a baud rate that is identical with your computer’s so that you can connect
the projector using a suitable RS-232 cable and update or download the
projector’s firmware. This function is intended for qualified service personnel.
Test Pattern
Press ENTER to display the grid test pattern. It helps you adjust the image size
and focus and check that the projected image is free of distortion.
The function is only available when the projector detects no input
signal.
High Altitude Mode
(Off)
A mode for operation in areas like high altitude or high temperature. See
"Operating in a high altitude environment" on page 34 for details.
Password
Password (Off)
Limits use of the projector to only those who know the correct password. See
"Utilizing the password function" on page 23 for details.
Change Password
You will be asked to enter the current password before changing to a new one.
See "Utilizing the password function" on page 23 for details.
Key Lock
Locks the keys on the projector and remote control except POWER ON/OFF
( ) and EXIT. See "Locking control keys" on page 36 for details.
I
I