Filter
Top Products
Billion 400G
Router
Chapter 4: Configuration
22
4. The list below has different mode applied for your choice. Choose 0/33/PPPoE(Recommended) and click Apply.
5. Please enter “Username” and “Password” as supplied by your ISP(Internet Service Provider) and click Apply to
continue.
Profile Port: Select the connection mode. There isADSL.
Encapsulation: Select the encapsulation mode. The default mode is PPPoE.
VPI/VCI: Enter the VPI and VCI information provided by your ISP.
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Service Name: This item is for identification purposes. If it is required, your ISP provides you the information.
Authentication Protocol: Default is Auto. Your ISP advises on using Chap or Pap.
IP Address: Your WAN IP address. Leave this at 0.0.0.0 to obtain automatically an IP address from your ISP.