Filter
Top Products
21
Translation
Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the
NAT chapter for more details.
Back
Click Back to go back to the first wizard screen.
Next
Click Next to continue to the next wizard screen.
3.11 DHCP Setup
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the BIPAC
5100S as a DHCP server or disable it. When configured as a server, the BIPAC 5100S
provides the TCP/IP configuration for the clients. If you turn DHCP service off, you must have
another DHCP server on your LAN, or else the computer must be manually configured.
3.11.1 IP Pool Setup
The BIPAC 5100S is pre-configured with a pool of 100 IP addresses starting from
192.168.1.100 to 192.168.1.199 for the client machines.
3.12 Wizard Setup Configuration: Third Screen
Verify the settings in the screen shown next. To change the LAN information on the BIPAC
5100S, click Change LAN Configurations. Otherwise click Save Settings to save the
configuration and skip to section 3.13.