Filter
Top Products
22
If you want to change your BIPAC 5100S LAN settings, click Change LAN Configuration to
display the screen as shown next.
The following table describes the labels in this screen.
LABEL DESCRIPTION
LAN IP Address Enter the IP address of your BIPAC 5100S in dotted decimal notation, for example,
192.168.1.254 (factory default).
LAN Subnet Mask Enter a subnet mask in dotted decimal notation.
DHCP
DHCP Server
From the DHCP Server drop-down list box, select On to allow your BIPAC 5100S to
assign IP addresses, an IP default gateway and DNS servers to computer systems
that support the DHCP client. Select Off to disable DHCP server.
When DHCP server is used, set the following items:
Client IP Pool
Starting Address
This field specifies the first of the contiguous addresses in the IP address pool.
Size of Client IP
Pool
This field specifies the size or count of the IP address pool.
Primary DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
Secondary DNS
Server
As above.
Back
Click Back to go back to the first wizard screen.
Finish
Click Finish to save the settings and proceed to the next wizard screen.