Filter
Top Products
32
LINESHARE PRO
NOTE
You must turn Protocol Tone
Access Signal Detection ON
to route calls to Port 1 and
Port 2 using this application.
Port 3 and Port 4 are factory-
preset ON. See Section 5.5
for more information.
To have the calling party
automatically route calls to a port
connected to the Lineshare Pro,
the caller must use a device that can
produce the single-frequency tones.
One device that identifies a
modem-type device with a single-
frequency tone is called the
Lineshare Master (FX155A). The
Lineshare Master can produce eight
different single-frequency tones that
allow the Lineshare Pro to route
calls to multiple modem-type devices
connected to a single phone line.
When the Lineshare Pro answers
a call and detects a single-frequency
tone, the call is automatically routed
to the correct port.