Filter
Top Products
34
LINESHARE PRO
If the Lineshare Pro does not
enter the programming mode (the
green LED continues flashing), try
again with a different phone.
When you are in the programming
mode and entering changes, the
Lineshare Pro notifies you of correct
or incorrect entries with the
following signals:
• Three short beeps: Indicates
that the entry is valid, and the
Lineshare Pro has accepted the
change.
• Single low beep: Indicates that
the entry is invalid, or out of
normal operating range, and the
Lineshare Pro did not accept the
change. Re-enter the command
string with a valid entry.
NOTE
All programming commands
end with a * key.
5.2 Lineshare Pro Features
Tables 5-1 and 5-2 list the Lineshare
Pro’s capabilities, factory settings,
and available options. The sections
that follow Tables 5-1 and 5-2
explain the features and functions
n detail and provide guidelines for
changing the program settings.
Enter the programming mode
by pressing # *.
Press 0 in front of a feature
number to turn the feature OFF.
Press 1 in front of a feature
number to turn the feature ON.
Exit the programming mode
by pressing * *.