Filter
Top Products
49
LINESHARE PRO
To turn Emergency Call Override
ON (automatic mode), enter the
programming mode and press the
following on your tone phone:
5 Emergency Call Override
1 Automatic
* End programming sequence (3
beeps indicate correct entry)
(Optional entries for additional
changes)
* Save changes and exit
programming
[6] Dual Tone Assignments
The Dual Tone Assignments
function allows you to define the
port access code to each of the
Lineshare Pro ports. When you or a
caller enter this code on the keypad
of a tone phone, the Lineshare Pro
transfers the call to the selected port.
You can enter up to a four-digit code
in this position for each of the ports.
The Dual Tone Assignments are
factory-preset as follows:
• Port 1 1 1
• Port 2 2 2
• Port 3 3 3
• Port 4 4 4
NOTE
You can set only one port’s
assignment per program-
ming sequence.
To select a new Dual Tone
Assignment for a port, press the
following on your tone phone:
6 Dual Tone Assignments
The desired port selection (1-4)
The desired new access code
* End programming sequence (3
beeps indicate correct entry)
(Optional entries for additional
changes)
* Save changes and exit
programming
NOTE
Do not program similar, or
identical access codes into
PORT 1, PORT 2, PORT 3, or
PORT 4 Dual Tone
Assignments (example:
PORT 1 = 123, PORT 2 =
1234). Similar or identical
codes may interfere with
proper operation.