Filter
Top Products
8
RELAY OUTPUT CARD PCI
3. Installation
3.1 Card Setup
The Relay Output Card PCI is a fully compliant PCI plug-and-play adapter. The
I/O address is auto-assigned by either your system BIOS or your plug-and-play
operating system.
3.2 Software Installation
F
OR
W
INDOWS
U
SERS
Choose Install Software at the beginning of the CD, select the Digital I/O software
drivers, and install SeaI/O.
3.3 System Installation
The Relay Output Card PCI can be installed in any of the PCI expansion slots.
1. Turn off the PC’s power. Disconnect the power cord.
2. Remove the PC’s case cover.
3. Locate an available PCI slot and remove the blank metal slot cover.
4. Gently insert the Relay Output Card PCI into the slot. Make sure that the card
is seated properly.
5. Replace the retaining screw.
6. Replace the cover.
7. Connect the power cord.
Installation is complete.