Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 47
EME144A-R2
Chapter 4: Notifications
5. Select the sensor and SNMP trap parameters (see Figures 4-8 and 4-9). First, click on the board that the sensor is attached to
and then select the sensor and click “Next.”
Figure 4-8. Select the sensor.
6. Select the status that you want to issue the notification for, select the action type, then click “Finish.”
Figure 4-9. Select the SNMP parameters.