Filter
Top Products
Black Box Networks PICO systems
Pico Manual v5.1
V5.1 16
4.5 Eye safety
No two installations sites are the same. The buildings or structures, the available space
and the accessibility of the place will be different in each case. Nevertheless, as a
general rule it is very important to select the installation site so, that nobody can look
directly into the transmitter. For this reason place the head either so high (on the side
wall of the building) or so close to the edge of the building (on a parapet on the
rooftop) that no person can approach it accidentally and can get into the beam path. Set
up barriers if necessary and put warning signs at prominent places.
The laser heads are provided with all labels and hazard warnings required by the
applicable standards. There are warning labels on both the left and right side of the
protective cover next to the optical window and there is a warning and an informative
label on the rear side of the laser head. The locations of those signs are shown in the
following pictures.
INVISIBLE LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
Output Power Max 50 mW, 785 nm
Pulse Duration : Not Pulsed